NEC UNIVERGE SV9100 Features And Specifications page 100

To use this feature for long distance calls, ARS must be programmed for the voice mail ports
set to dial out.
Integration Options line of System/Switch/Switch Information Screen to enable this voice
mail feature. Default is RCV=6,10 where 6 is the number of rings voice mail tries when
returning a call, and 10 is the number of minutes a returned call can last.
On the UM8000 Mail, a trunk access code must be entered on the Return call outdial
access code line of System/Switch/Dialing Codes screen so the Return Call feature can
access a trunk to return the call. When this is not entered, the mailbox user is not prompted
to return the call even when Caller ID information is available.
Use Program 14-01-22 Caller ID to Voice Mail to enable or disable per trunk the ability to
send the Caller ID digits to voice mail.
After the call is ended by either party, the voice mail user is disconnected.
Default Settings
None
System Availability
Terminals
All Multiline Terminals
Required Component(s)
UM8000 Mail
InMail
Related Features

UM8000 Mail

InMail
On the UM8000 Mail, the Return Call parameter must be entered on the
100