NEC UNIVERGE SV9100 Features And Specifications page 396

be programmed on a DSS Console.
Programmable Function keys for Trunk Group ( 02), Virtual Extension ( 03), and Call
* *
Appearance (CAP) Key ( 08) cannot be programmed on a DSS Console as the system
*
does not allow entry of the additional data required for these keys.
A user can use the One-Touch Programmable Function Key (code 01) to have DSS
Console keys for Personal Speed Dial and common and group Speed Dial.
Lighting status for agents and non- agents does not appear on the same console type. For
agent's lighting status, a DSS Console must be programmed as a console in Program 30-
01-01. For non- agents, the console must be programmed as a business console.
A DSS key indicates only a Call Forwarding indication for extensions forwarded with
Immediate Call Forwarding.
A DSS Console can have line keys for placing and answering calls.
The DSS Console provides one-touch calling and a Busy Lamp Field for Door Boxes. Refer
to Door Box when programming Door Boxes.
The DSS Console provides one-touch Night Service switching. Refer to Night Service
when programming Night Service options.
Like a One-Touch Key, a user can have DSS Console keys for Direct Station Selection,
Trunk Calling, Personal Speed Dial, Speed Dialing, and Service Code access.
The DSS Console provides one-touch External and Internal Page zone access. Refer to
Paging, External and Paging, Internal.
You can program the DSS Console keys with service codes to provide the functions of
many of the Programmable Function keys. The stored service code can have up to three
digits, but it can have additional option codes added (e.g. to set Immediate Call Forward for
all calls. Trunk Group ( 02), Virtual Extension ( 03), and Call Appearance (CAP) Key ( 08)
* * *
codes can not be programmed on a DSS Console as the system does not allow entry of the
additional data required.
The capacity of a console can be expanded by assigning a Page key (shift key). The Page
key (shift key) must be assigned on keys 55~60.
The expanded capacity for DSS Consoles (two pages), is not supported for DSS Consoles
in the Monitor Mode.
When a multiline terminal user is on a call, they can transfer to another station by pressing
a DSS key for that station. It is not necessary to press Transfer to transfer to another
station using a DSS key.
 When a multiline terminal user is on a call, they must press Transfer to transfer a call off site
with a DSS key.
Pauses can be entered in the dial string of a DSS/One Touch button. The pause is entered as
P in the dial string and causes the system to wait three seconds before sending the rest of
the digits that follow the P (pause). Multiple pauses can be entered.
The @ can be entered in the dial string of a DSS/One Touch button. The @ only applies to ISDN
and Intercom calls. When using the @, the system waits for the destination to answer (answer
supervision), and then sends the rest of the digits.
Entering a P (pause) in a DSS/One Touch dial string can be used for CO calls, Intercom
calls, or after the @ for ISDN calls.
When the system has the Hotel Motel license (0007), the Message Waiting Indication
396