To Drop An Outside Call From The Conference - NEC UNIVERGE SV9100 Features And Specifications

With an outside call
Conference. The unanswered call drops and the initiator is back into the Conference call.

Adding an Intercom call to an outside Conference call:
display or Conf twice to re-establish the Conference. If using a non-display telephone, press Conf
twice.

With only Intercom calls in the Conference:
mail answers, there is no way to drop that extension out. You must drop the Conference call.
5. Repeat steps 2~4 to add more parties.
Single Line Telephone
1. Establish Intercom or trunk call.
2. Hookflash and dial
3. Dial extension you want to add.
- OR -
Access trunk call.
- OR -
Retrieve call from Park orbit.
4. Hookflash and repeat step 3 to add more parties.
- OR -
Hookflash twice to set up the Conference.
To Split (alternate) between the parties in Conference:
Multiline Terminal
1. Press Conf (Transfer) or Conference key (Program 15-07 or SC 851: 07).
2. Dial Split service code (894).

Repeat this procedure to alternate between the remaining parties in the Conference. Press the Conf
softkey or press Conf twice to set up the Conference again.
Single Line Telephone
1. Hookflash and dial 894.
 Repeat this procedure to alternate between the remaining parties in the Conference. Hookflash twice
to set up the Conference again.

To drop an outside call from the Conference:

1. Press Hold to place the conference call on hold.
2. Hang up.
 The lines involved in the Conference ring back separately to the telephone.
3. Answer and disconnect the unwanted outside call.
4. To re-establish the Conference, answer the remaining call by pressing Conf after each call is
answered. Press Conf twice when all calls have been answered.
, press the line or Call Appearance (CAP) key for a call previously added to the
Press Conf twice to re-establish the Conference. If the voice
1.
#
Press the Conf softkey on the multiline terminal
248