Flexible Numbering Plan - NEC UNIVERGE SV9100 Features And Specifications

Your DSS Console provides room monitoring abilities. You can see at a glance which rooms have Wake
Up Calls set or messages waiting. In addition, you can still use your console for business mode features.
Do Not Disturb
A guest can activate DND anytime they need privacy (for example, if they need to work uninterrupted).
Do Not Disturb (DND) blocks the room telephone incoming calls and Paging announcements. This can
be set from the room phone or attendant phone.

Flexible Numbering Plan

To simplify dialing guests and services in your facility, customize your system to have room numbers
match phone extension numbers. For example, if the rooms on the first floor are numbered 100~120, the
corresponding room extensions should also be 100~120.
Conditions
The following features are supported:
View current room status in Program 42-02-03 via Web Pro and Phone Pro.
Use Program 42-01-06 to enable (1) or disable (0) the ability to change any room status to
another room status.
Set room status on check out using Programs 42-06-07 and 42-06-08.
When setting room status automatically on check out, you cannot set a room to Room
Clean (Occupied) from the room using access code 640. This status can only be changed
from the front desk telephone (access code 641).
When Program 42-01-06 is disabled, valid room status changes are limited. Refer to the
PMS Developer Guide for information on valid status changes.
The current room status in Program 42-02-03 cannot be checked via PCPro.
When the system is configured for the VRS feature, Wake Up call greetings to single line
room telephones are supported.
Wakeup calls to multiline room telephones do not provide a wake up call greeting.
Wake Up call greetings to single line room telephones require the VRS feature and
licensing.
When the SV9100 is interfaced with an external PMS application, the first operator
extension set in Program 20-17-01 must be a physical phone connected to the phone
system for all PMS features to work.
The SV9100 supports only one GCD-PVAA with the PVA PMS application.
The GCD-PVAA is chassis specific. An SV8100 CD-PVAA can be used in a SV9100
system if the Hardware Migration license is installed. A n SV9100 GCD-PVAA can be
used in a SV8100 chassis.
The PVA PMS web interface supports Windows Internet Explorer 11 run on any Windows
7 operating system.
Function codes 92 and 93 can be assigned only to a DSS Console that is in Hotel Mode.
These features do not work when programmed on multiline telephone line keys or on a
DSS Console in Business mode.
When multiple DSS Consoles are used for Hotel/Motel, function keys must be assigned to
each DSS console for Wake Up Call Indication and Room Status Indication.
551