Remote (System) Upgrade - NEC UNIVERGE SV9100 Features And Specifications

Hide thumbs Also See for UNIVERGE SV9100:

Table of Contents

Remote (System) Upgrade

With PCPro or WebPro, the UNIVERGE SV9100 can be remotely upgraded to a newer version of main

system software. When a new version of main system software is released, a firmware package file is

provided. Using the PCPro or WebPro application, a technician can remotely upgrade the firmware on

the GCD-CP10. The upgrade can be applied immediately, or at a scheduled date and time. Remote

Upgrade is supported only via a LAN connection. A modem connection is NOT supported for Remote

When doing a Firmware Upgrade, the telephone system can become sluggish during the

file transfer portion of the update. You should perform updates after hours, even if the

update is scheduled. The file transfer happens when the update is set. For example, at

2:00PM a technician schedules an update to happen at 12:00AM. When they click start

(2:00PM), it begins transferring the file to the system. At this time the telephone system

experiences sluggishness until the file transfer is complete. When the time turns to

12:00AM, the telephone system resets and switches to the new firmware.

The Package file needed is provided by NEC at the time the new version of main system

software is released.

Booting from the USB drive does not replace the firmware in Flash Memory on the

The time entered on the Firmware Upgrade screens is relative to the time on the

GCD-CP10, not the PC that PCPro was launched from. The user should take into account

time zone differences when using this feature.

The time to upload a firmware package file is directly related to the file size. Generally, it

takes a few minutes.

Remote Upgrade is supported only via LAN connection. A modem or serial connection is

not supported for Remote Upgrade.

Web Pro supports remote upgrade and is only available in the Manufacture (MF) and

Installer (IN) level logins.

If a loss of connection occurs during a Remote Upgrade, the Remote Upgrade fails and the

Remote Update process stops. The system remains at the previously installed software.

Default Settings

At default, PCPro and WebPro are set to Update Immediately after the upload.

System Availability