Using The Headset With Automatic Answer; To Redirect Calls To The Headset And Disable The Hookswitch - NEC UNIVERGE SV9100 Features And Specifications

Program
Program Name/Description
Number
LAN Setup for External Equipment – TCP
10-20-01
Port
Define the TCP port/address/etc. for
communicating to external equipment.
IP Address List – IP Address of 1st Party CTI
93-06-01
Client
Read only.
Indicates IP Address of 1st Party CTI client.
IP Address List – Availability of 1st Party
93-06-02
CTI Connection
Read only.
Indicates Availability of 1st Party CTI client
connection.
Operation
TAPI operation is automatic once programmed in the telephone system and enabled in the PC TAPI
application, unless a headset is used.

Using the Headset with Automatic Answer:

1. With the multiline terminal in an idle state, press the Help key.
2. Press the Headset key (Program 15-07 or SC 851: 05) twice.
3. Press the Exit key to return the display to idle.
 The Headset key blinks when Automatic Headset is activated.

To cancel Automatic Headset, repeat these steps.
To redirect calls to the headset and disable the hookswitch (required for some TAPI features):
1. With the multiline terminal in an idle state, press the Help key.
2. Press the Headset key (Program 15-07 or SC 851: 05) twice.
3. Press the Exit key to return the display to idle.
 The Headset key blinks when Automatic Headset is activated.
Input Data
0 ~ 65535
IP Address:
xxx.xxx.xxx.xxx
0 = Not Available
1 = Available
1215
Default
External Device
1 (CTI) = 0
External Device
2 ( MIS) = 4000
External Device
5 (SMDR
Output) = 0
External Device
6 (DIM Output) =
0
External Device
11 (O&M Server)
= 8010
External Device
12 (Traffic
Report Output) =
0
External Device
13 (Room Data
Output for Hotel
Service ) = 0
No Setting
No Setting