Using SNMP Traps Example
SNMP Traps can be used to provide notifications to an SNMP application when an SV9100 alarm has
been triggered on the SV9100. For an alarm to be trapped, it has be set to Major or Minor in Program
90-10-01. Usually the SNMP application has to be configured to watch for a particular trap to be
triggered.
The user first sets a trap for alarm 64. When alarm 64 occurs, an SNMP message is sent out that the
SNMP application picks up and displays.
SNMP – Set Trap Alarm 64
The details of the alarm is sent in the trap message displayed in the SNMP application. Refer
to SNMP – Trap Alarm Details for information available in the alarm display.
SNMP – Trap Alarm Details
1091