NEC UNIVERGE SV9100 Features And Specifications page 764

Program
Program Name/Description
Number
SIP System Information Setup – Domain
10-28-01
Name
Define the Domain name. This information is
generally provided by the SIP carrier.
SIP System Information Setup – Host Name
10-28-02
Define the Domain name. This information is
generally provided by the SIP carrier.
SIP System Information Setup – Transport
10-28-03
Protocol
Define the Transport type. This option is always
set to UDP.
SIP System Information Setup – Domain
10-28-05
Assignment
Define the Domain Assignment. This entry is
determined by what information the SIP carrier
provides. If the SIP carrier provides a server
name: SIPconnect-sca@L0.cbeyond.net, then
the domain is: L0.cbeyond.net and the host
name is SIPconnect-sca.
SIP System Information Setup – IP Trunk
10-28-06
Port Binding
Enable/Disable IP Trunk Port binding.
SIP Server Information Setup – Default
10-29-01
Proxy (Outbound)
Define the SIP Proxy setup, Default Proxy
(Outbound). When SIP trunking is used, this
must be on.
If entries are made in Program 10-29-xx for an
SIP Server and the SIP Server is removed or not
used, the entries in Program 10-29-xx must be set
back to their default settings. Even if Program
10-29-01 is set to 0 (off), the UNIVERGE SV9100
still checks the settings in the remaining 10-29
programs.
SIP Server Information Setup – Default
10-29-02
Proxy (Inbound)
Define the Default Proxy (Inbound).
SIP Server Information Setup – Default
10-29-03
Proxy IP Address
Enter the default Proxy IP Address if the SIP
carrier is using an IP address for the proxy. In
most cases, this is left at the default entry as
the domain name is used.
SIP Server Information Setup – Default
10-29-04
Proxy Port Number
Define the Proxy Port Number.
Input Data
Maximum of 64digits.
(Profile 1 ~ Profile 2)
Maximum of 48 digits.
(Profile 1 ~ Profile 2)
0 = UDP
1 = TCP
(Profile 1 ~ Profile 2)
0 = IP Address
1 = Domain Name
(Profile 1 ~ Profile 2)
0 = Disable
1 = Enable
(Profile 1 ~ Profile 2)
0 = Off
1 = On
(Profile 1 ~ Profile 2)
0 = Off
1 = On
(Profile 1 ~ Profile 2)
0.0.0.0 ~ 126.255.255.254
128.0.0.1 ~ 191.255.255.254
192.0.0.1 ~ 223.255.255.254
(Profile 1 ~ Profile 2)
0 ~ 65535
(Profile 1 ~ Profile 2)
764
Default
No Setting
No Setting
0
0
0
0
0
0.0.0.0
5060