NEC UNIVERGE SV9100 Features And Specifications page 411

Program
Program Name/Description
Number
22-03-01 Trunk Ring Tone Range
Set the ring tone range (1 ~ 9) for each trunk.
Service Tone Setup – Repeat Count
80-01-01
Customize the system basic tones and system
service tones. You need to reset for the
changes to take effect.
Service Tone Setup – Basic Tone Number
80-01-02
The following features require that the system
tones listed below be changed to match the
table. After changing these settings the chassis
must be reset for the changes to take effect.
Call Screening
Call Holding
Busy Greeting
Await Answer Transfer
Service Tone Setup – Basic Tone Number
80-01-02
(14)
The following features require that the system
tones listed below be changed to match the
table. After changing these settings the chassis
must be reset for the changes to take effect.
Call Screening
Call Holding
Busy Greeting
Await Answer Transfer
Service Tone Setup – Basic Tone Number
80-01-02
(39)
The following features require that the system
tones listed below be changed to match the
table. After changing these settings the chassis
must be reset for the changes to take effect.
Call Screening
Call Holding
Busy Greeting
Await Answer Transfer
Input Data
0 = Ring Tone Pattern 1
1 = Ring Tone Pattern 2
2 = Ring Tone Pattern 3
3 = Ring Tone Pattern 4
4 = Melody 1
5 = Melody 2
6 = Melody 3
7 = Melody 4
8 = Melody 5
9 = Ring Tone Pattern 5
10 = Ring Tone Pattern 6
11 = Ring Tone Pattern 7
12 = Ring Tone Pattern 8
0 ~ 255 (0 = until On-Hook)
1 ~ 33
(0 = No Tone)
(33 = Default Time Slot)
411
Default
0
0~255 (0 = until
On-Hook)
33 = Default
Time Slot
Refer to Table 2-
17 Basic Tone
Table – Tone 06
Refer to Table 2-
18 Basic Tone
Table – Tone 14
Refer to Table 2-
19 Basic Tone
Table – Tone 39