NEC UNIVERGE SV9100 Features And Specifications page 186

After successful measurement, the option to copy the same settings to all analog trunks is shown.
Side Tone Auto Setup is only available when the system is in an idle condition.
Conditions
The incoming ring group assignment programmed in Program 41-03-01 overrides the
setting in Program 22-05-01.
Ringing calls can be picked up regardless of access map programming.
An extension user can answer an outside call just by lifting the handset.
Long Conversation Cutoff can disconnect incoming and outgoing CO calls after a set time
period. Using the Warning Tone for Long Conversation feature allows users on outgoing
calls to hear a warning tone prior to the call disconnecting.
Line keys and Call Appearance (CAP) Keys simplify answering outside calls.
If the Absent text message was set by the originating extension, the destination extension
displays the assigned text message instead of the Reason for Transfer message.
If an extension is assigned to a Trunk Access Map that has no access for a trunk, the
extension can still retrieve parked calls on that trunk. The extension can also Group Call
Pickup and Direct Call Pickup calls ringing another extension on that trunk.
The system can be programmed to blink the page number of a DT300/DT700 DESI-Less
terminal when it receives an incoming call, or switch to the page the incoming call is on.
Furthermore, a default page can be defined for the DESI-Less terminal to change to when it
goes idle or when it has answered a call.
DESI-Less screen page switching only applies to idle terminals. If a terminal is not idle, the
screen will not switch if another call comes in until the phone goes idle.
To adjust for proper audio quality, refer to Programs 81-07 and 81-17.
Default Settings
Enabled
System Availability
Terminals
All Terminals
Required Component(s)
Any Trunk Blade (i.e., GCD-4COTA, GCD-2BRIA, GCD-PRTA, etc.)
186