NEC UNIVERGE SV9100 Features And Specifications page 133

Program
Program Name/Description
Number
Basic Extension Data Setup – Restriction for
15-01-05
Outgoing Disable on Incoming Line
Enable (1)/Disable (0) supervised dial detection
for an extension.
Multiline Telephone Basic Data Setup –
15-02-07
Automatic Hold for CO Lines
Assign automatic hold (or disconnect) for CO
lines.
Multiline Telephone Basic Data Setup –
15-02-21
Virtual Extension Access Mode (when idle
Virtual Extension key pressed)
Determine whether a Virtual Extension/Call
Arrival Key (CAR) should function as a DSS
key, a Virtual Extension, or a CAR key. When
DSS (0) is selected, the key functions as a DSS
key to the extension and for incoming calls to
that extension. When Outgoing (1) is selected,
the key functions as a virtual extension and can
be used for incoming and outgoing calls. When
Ignore (2) is selected, the key functions as a
CAR key and can receive incoming calls only.
15-07-01 Programmable Function Keys
Assign functions to multiline terminal line keys.
15-08-01 Incoming Virtual Extension Ring Tone Setup
When an extension or a virtual extension is
assigned to the function key on the key
telephone, select the ring tone when receiving a
call on that key.
For Contact Centre CAR keys, only tone pattern
1 (entry 0) can be used. The remaining patterns
are not checked with this feature.
15-09-01 Virtual Extension Ring Assignment
Assign the ringing options for an extension
Virtual Extension Key or Virtual Extension
Group Answer Key which is defined in Program
15-07.
Input Data
0 = No
1 = Yes
0 = Hold
1 = Disconnect (Cut)
Virtual Extension Key Mode
0 = DSS
1 = Outgoing
2 = Ignore
Line Key 1 ~ 48
0 ~ 99 (Normal Function Code
851 by default)
* *
00 ~ 99 (Appearance
Function Code) (Service Code
852 by default)
*
( 03 + ICM = VE or CAR where
ICM is the extension number of
the VE or CAR)
0 = Tone Pattern 1
1 = Tone Pattern 2
2 = Tone Pattern 3
3 = Tone Pattern 4
4 = Incoming Ring Tone
Extension
5 = Tone Pattern 5
6 = Tone Pattern 6
7 = Tone Pattern 7
8 = Tone Pattern 8
Day Night/Mode: 1 ~ 8
Ringing:
0 = No Ringing
1 = Ring
133
Default
0
1
2
0 = Tone Pattern
1
0