To Enter An Account Code For An Incoming Call; To Enter An Account Code At A Single Line Telephone - NEC UNIVERGE SV9100 Features And Specifications

- OR -
Press your Account Code key (Program 15-07 or SC 851: code 50).
3. Dial your Account Code (1~16 digits, using 0~9 and
 If you make an incorrect entry, your system may automatically alert the operator. If Account Codes
are hidden, each digit you dial shows
4. Dial *.
- OR -
Press your Account Code key (Program 15-07 or SC 851: code 50).
5. Dial the number you want to call.

To enter an Account Code for an incoming call:

This procedure is not available for single line telephones.
1. Answer incoming call.
 If Account Codes for Incoming Calls is disabled, the following steps dial digits out to the connected
trunk.
2. Dial .
*
3. Enter the Account Code.
 You can enter any code of the proper length. Incoming Account Codes cannot be Forced or Verified.
4. Dial .
*

To enter an Account Code at a single line telephone:

1. Access trunk for outside call.
 Dial a code to access a trunk.
2. Dial
*
3. Enter Account Code (1~16 digits).
4. Dial .
*
5. Dial number you want to call.
).
#
on the telephone display.
*
17