NEC UNIVERGE SV9100 Features And Specifications page 689

The system sees terminal types 1 (Economy), 2 (Value), 3 (Desi-Less), 4 (Sophisticated)
and 5 (Softphone) as the same terminal type.
When using Multiple Logon, the same Personal ID index can be assigned to an
ITL/Softphone or CTI (Desktop) terminal type.
Two ports of the same terminal type (Program 15-05-26) cannot be assigned to the same
Personal ID index (Program 15-05-27).
Program 10-46-01 must be set to 1 (Auto) or 2 (Manual) for Multiple Logon to work.
When three ports are assigned the same Personal ID index in Program 15-05-27, if
Program 15-05-26 is not set for those ports, the terminal types will be assigned based on
order of login. If Program 15-05-26 is set, the login order does not matter and they will
assign the correct port.
The Override feature functions the same as single login.
XML Multi-Window Support – the multi-window service adds the following:
Multiple XML applications can be displayed and accessed through the NEC terminal XML
menu.
Line key operation can be performed without closing the active XML application window.
DT700 terminals and wireless IP terminals utilizing NAPT can be registered to the primary or
a secondary system. Refer to the feature
With SV9100 system software and GPZ-IPLE daughter board installed, half duplex
connections are not supported. For troubleshooting purposes, a managed switch capable
of port mirroring is required to capture packet data from the SV9100 IPLE Ethernet port.
When downloading firmware for previously installed DT700 and the ITL-12CG/ITL-12DG
terminals, the
firmware for both can be downloaded at the same time.
Restrictions
When using DT700 IP phones, assigning the following features to a large number of
phones (100 or more) is not recommended:
The same Trunk Line assignment (squared key system)
The same Virtual Extension assignment
Paging key with LED ON assignment
The same location Park key
The same location CAP key
The same BLF key assignment
Day Night Mode Change key assignment
The same VM Mail Box key assignment
Trunk Group key
Trunk Group All Line Busy Indication
An SIP multiline terminal can override another SIP multiline terminal or a Softphone.
A Softphone can override another Softphone or an SIP multiline terminal.
Override does not support SIP multiline terminal with DSS console or Softphone with DSS
Console.
SV9100 NetLink for additional details.
689