NEC UNIVERGE SV9100 Features And Specifications page 435

Power On for the Entire Power Save Group
1. Assign Power Save key (SC851 code
2. Press the Power Save key.
3. The key is turned Off.
Power Saving Mode
< Program >
Program 15-02-18: TEL 200: 1
Program 20-02-10: 1 minute
1. Idle state at TEL200.
2. One minute later, LED areas highlighted in red darken at TEL200.
Multiline Terminal Darkens
Power Failure Saving Mode
Set Program 15-27-02 to 1 for extensions to have the power cut when the system losses power and runs
on battery backup.
Example
< Program >
Program 15-27-02:
TEL 101: set to a 1
TEL 102: set to a 1
TEL 103: set to a 0
TEL 104: set to a 0
TEL 101 TEL 102 will be powered Off when a power failure occurs.
06) with additional data 00.
#
435