NEC UNIVERGE SV9100 Features And Specifications page 81

Program
Program Name/Description
Number
Automatic Route Selection Service – Class
26-01-06
of Service Match Access
With the ARS Class of Service Match Access
feature, you can determine whether or not the
system should allow a call based on the COS
assigned to the Dial Analysis Table (Program
26-02). This change can be used to create a
tenant-like application. It then uses the trunk
group set in the Additional Entry in Program
26-02-03 to place the out-going call. When this
feature is enabled, the calls are routed in
sequential order, and forward – provided the
Class of Service for the trunk groups match.
Automatic Route Selection Service –
26-01-08
DT800/DT700 Multi Log-on for ARS
Enable or Disable Recognize Extension
Location when logging in with NetLink
Dial Analysis Table for ARS/LCR – Dial
26-02-01
Enter the digits (16 digits maximum: 1 ~ 9, 0 *
#
, @; 2000 separate entries) for the Dial
Analysis Table which is analyzed by ARS/LCR.
This table is checked after any programmed
F-Route operations have completed. The
system then refers to Program 26-02-02 and
Program 26-02-03 to determine the routing for
the call. To enter a wild card/don't care digit,
press Line Key 1 to enter an @ symbol. It is
important to remember that the system checks
the table numbers in numerical order. This
means that entries for specific numbers should
be entered first (such as your local area codes),
then enter the items containing wild card digits.
If the system sees an entry of 2@@, any table
entries which follow are ignored.
For example, if 268, 269, and 270 are local
exchanges, these would be the first three table
entries which route according to the settings
made in Program 26-02-02 and Program
26-02-03 for each of the table entries. If the
next entry is 2@@, the system checks no
further in this program and routes all other 2xx
numbers according to the entries made in
Program 26-02-02 and Program 26-02-03 for
this table entry.
Input Data
0 = Disable (Off)
1 = Enable (On)
0 = Disable (Off)
1 = Enable (On)
Maximum of 16 digits (0 ~ 9, *
#
, @)
81
Default
0
0
No Setting