Access From The Display - ABB SACE Emax 2 Series Installation, Operation And Maintenance Instructions

Access from the display With the release energized, the presence of the modules activates the following on the display:
167 | © 2013 ABB | 1SDH001000R0002 - L7804
• Additional graphical pages, that display measurements.
• Additional menus.
The additional graphical pages are:
• A summary of the measurements in progress (maximum phase current, maximum phase-
to-phase voltage, power factor, and the active, reactive and apparent power), accessible
from the page Histograms (see page 61).
• The indicators of the maximum phase-to-phase voltage and of the active, reactive and
apparent power, accessible by selecting the pages Measuring instruments (see page 63).
• The measurements of the phase and phase-to-phase voltages, and of the active, reactive
and apparent power, as well as the energy meters, accessible by selecting the pages
Measurements (see page 64).
• The history of the minimum and maximum phase-to-phase voltages and maximum and
mean powers, accessible from the menu Measurements (see page 72).
• The wave forms and the harmonics of the phase-to-phase voltages, accessible from the
menu Measurements.
The additional menus allow you to:
• Configure the protections activated by Ekip Measuring Pro.
• Configure the modules.
• Display the measurements associated to the modules (in addition to those displayed in
the graphical pages).
• Display information on the modules.
The following table illustrates the path from the display to access the configuration parameters
of the protections activated by the Ekip Measuring Pro module:
...
IU Protection
RC Protection
Protection UV
Protection UV2
Protection OV
Protection OV2
Protection RV
Protection VU
Protection UF
Protection UF2
Protection OF
Advanced
Protection OF2
Protection ROCOF
Protection RP
Protection RQ
Protection OP
Protection OQ
Protection UP
Syncrocheck Protection
Signallings
Current thresholds
...
(1)
Protection available with Rating Plug RC and Ekip Measuring Pro modules, and external differential toroid
or RC (see the menu Settings, Circuit-breaker, Earth protection), and alternative to the Gext protection (see
the Protections menu).
(1)
Phase Sequence
Cos φ
ABB | SACE Emax 2
Continued on the next page
Electronic accessories | 2 - Ekip Measuring modules