Ekip Signalling 4K Module; Description; Compatibility And Power Supply; Electrical Characteristics - ABB SACE Emax 2 Series Installation, Operation And Maintenance Instructions

4 - Ekip Signalling 4K module

Description The Ekip Signalling 4K is a signalling accessory module.
Compatibility and power supply The module can be installed in the presence of Ekip Touch, Hi-Touch, G Touch, and G Hi-Touch
Electrical characteristics The following table lists the electrical characteristics of the outputs of the module:
178 | © 2013 ABB | 1SDH001000R0002 - L7804
The module has:
• Four contacts for output signals.
• Four digital inputs.
• A power status LED, and eight signalling LEDs (one LED for every output/input).
NOTE: for the access to outputs and inputs, see the paragraph "Connections" on
page 179. For the location of the LEDs, see the paragraph "Signallings", on page
184.
To switch the state of an input, a short circuit must be created between the input, and a
reference available on the same terminal box. In parallel, the information on the state of the
inputs is transmitted by the module to the release, that can be programmed so that the
activation of an input corresponds to an action on the part of the release.
Instead, the closing or the opening of the contacts is commanded by the release, which can
be programmed so that the closing/opening corresponds to the occurrence of a desired event
or combination of events.
The signalling LEDs light up in the presence of the short circuit for the inputs, or by closing the
contact for the outputs.
releases, and requires the presence of an Ekip Supply module in the first slot of the circuit-
breaker terminal box.
Component Characteristics
• Maximum switching power
• Maximum switching voltage
Output • Breaking power
contacts 4A @ 250V AC.
• Dielectric strength between open contacts: 2000 V AC (1 minute @ 50
Hz).
(1)
Data relating to a resistive load.
: 1250 VA.
(1)
: 150V DC / 250 V AC.
(1)
: 2 A @ 30 V DC, 0.8 A @ 50 V DC, 0.2 A @ 150 V DC,
(1)
Electronic accessories | 4 - Ekip Signalling 4K module
ABB | SACE Emax 2