Siemens SINAMICS G150 Operating Instructions Manual page 139

Position of the threshold switch
The Braking Module is located in the top section of the cabinet unit in the discharge air duct
of the Motor Module. The position of the threshold switch can be taken from the figure below.
Figure 4-26 Braking Modules for frame size JX
Position of the threshold switch
Note
Switch positions
The threshold switches for the Braking Modules are positioned on the panel as follows:
• Braking Modules for frame size JX: position "1" is back; position "2" is front
Converter cabinet units
Operating Instructions, 07/2016, A5E03347396A
Electrical installation
4.10 Other connections
139