Siemens SINAMICS G150 Operating Instructions Manual page 656

Technical specifications
12.3 Technical data
Article number
Short-circuit current rating per IEC
Minimum short-circuit current
Rated output of a typical 6-pole standard induction motor based on I
1)
The base-load current I
2)
(see "Overload capability").
The base-load current I
3)
(see "Overload capability").
The current values given here are based on the rated output current.
4)
The recommendations for the North American market in AWG or MCM must be taken from the appropriate NEC
5)
(National Electrical Code) or CEC (Canadian Electrical Code) standards.
In conjunction with the specified fuses or circuit breakers.
6)
Minimum current required for reliably triggering protective devices.
7)
656
6SL3710- 2GH42-4EA3
kA 2 x 85
6)
A 2 x 2500
7)
is based on a duty cycle of 110% for 60 s or 150% for 10 s with a duty cycle duration of 300 s
L
is based on a duty cycle of 150% for 60 s or 160% for 10 s with a duty cycle duration of 300 s
H
2GH42-7EA3
2 x 85
2 x 3000
or I at 690 V 3 AC 50 Hz.
L H
Operating Instructions, 07/2016, A5E03347396A
Converter cabinet units