Connecting The Dc Link Connections - Siemens SINAMICS G150 Operating Instructions Manual

4.6.3

Connecting the DC link connections

Connecting the DC link
Pre-assembled busbars are provided for connecting the DC links of the two transport units
(sub-cabinets); these are located in the right transport unit (right sub-cabinet) and are
fastened using cable ties (in figure
provided in the accessories kit.
Figure 4-4
Converter cabinet units
Operating Instructions, 07/2016, A5E03347396A
①
Non-connected DC link (DC busbar):
). The screws for fastening the DC link connection are
Electrical installation
4.6 Electrical connection
77