Siemens SINAMICS G150 Operating Instructions Manual page 239

11.The SINAMICS drive is displayed as drive object in the project navigator.
12.You can now configure the drive unit (see Chapter "Configuring the drive unit").
Note
Storage location of the IP address
The IP address and device name are stored on the memory card of the Control Unit (non-
volatile).
Parameter
Parameters can also be used to modify and/or display the properties of the Ethernet
interface.
• p8900
• p8901
• p8902
• p8903
• p8904
• p8905
• r8910
• r8911
• r8912
• r8913
• r8914
• r8915
Converter cabinet units
Operating Instructions, 07/2016, A5E03347396A
IE name of station
IE IP address of station
IE default gateway of station
IE subnet mask of station
IE DHCP mode
IE interface configuration
IE name of station active
IE IP address of station active
IE default gateway of station active
IE subnet mask of station active
IE DHCP mode of station active
IE MAC address of station
5.3 Procedure for commissioning with STARTER
Commissioning
239