Figure 5-8
⇒ Click Continue > to set up a drive unit in the project wizard.
Figure 5-9
⇒ Choose the following data from the list fields:
Device: Sinamics
Type: G150 CU320-2 DP or G150 CU320-2 PN with option K95
Version: 4.8
Target device address: the corresponding bus address for the drive
The entry in Name: can be freely selected.
⇒ Click Insert
The selected drive unit is displayed in a preview window in the project wizard.
Converter cabinet units
Operating Instructions, 07/2016, A5E03347396A
Complete setting the interface
Inserting the drive unit
5.3 Procedure for commissioning with STARTER
Commissioning
205