Parameters - Siemens SINAMICS G150 Operating Instructions Manual

9.2.1.4

Parameters

• r0047
• p1300
• p1900
• p1909
• p1910
• p1959
• p1960
• p1961
• p1965
• p1967
• r1968
• r1973
• p1980
• r3925
• r3927
• r3928
9.2.2 Efficiency optimization
Description
The following can be achieved when optimizing efficiency using p1580:
● Lower motor losses in the partial load range
● Minimization of noise in the motor
Converter cabinet units
Operating Instructions, 07/2016, A5E03347396A
Motor data identification and speed controller optimization
Open-loop/closed-loop control operating mode
Motor data identification and rotating measurement
Motor data identification, control word
Motor data identification selection
Rotating measurement configuration
Rotating measurement selection
Saturation characteristic speed to determine
Speed controller optimization speed
Speed controller optimization dynamic factor
Speed controller optimization actual dynamic factor
Rotating measurement encoder test pulse number determined
Pole position identification procedure
Identification final display
Motor data identification, control word
Rotating measurement configuration
Functions, monitoring, and protective functions
9.2 Drive functions
483