Siemens SINAMICS G150 Operating Instructions Manual page 368

Operation
6.9 Communication via PROFINET IO
I&M parameters
Table 6- 31 Parameter designation, assignment and meaning
I&M parameter des- For-
ignation mat
I&M 0: -
IM_SUPPORTED
I&M 1: Visible
TAG_FUNCTION string
I&M 1: Visible
TAG_LOCATION string
I&M 2: Visible
INSTALLATION_ string
DATE
368
Size/ Initialization
octets
- -
32 Space
0x20...0x20
22 Space
0x20...0x20
16 Space
0x20...0x7E
SINAMICS Meaning
parameters
r8820[62,63] The parameter indicates which I&M data sets
are supported.
The value 0x1E indicates that I&M data sets
1...4 are available.
p8806[0...31] Text that identifies the function or task of the
device.
p8806[32...53 Text that identifies the device location.
]
p8807[0...15] Text with the date of the installation or the
initial commissioning of the device. The follow-
ing date formats are supported:
YYYY-MM-DD
•
YYYY-MM-DD hh:mm
•
– YYYY: Year
– MM: Month 01...12
– DD: Day 01...31
– hh: Hours 00...23
– mm: Minutes 00...59
The separators between the individual specifi-
cations, i.e. hyphen '-', blank ' ' and colon ':',
must be entered.
Operating Instructions, 07/2016, A5E03347396A
Converter cabinet units