Command Sources - Siemens SINAMICS G150 Operating Instructions Manual

Operation

6.4 Command sources

6.4 Command sources
6.4.1 "PROFIdrive" default setting
Preconditions
The "PROFIdrive" default setting was chosen during commissioning:
• STARTER (p0700):
• AOP30 (p0700):
Command sources
Figure 6-9
Priority
The command source priorities are shown in the diagram "Command sources - AOP30 <->
PROFIdrive".
Note
Emergency OFF signals
The emergency OFF and motor protection signals are always active (regardless of the
command source).
All of the supplementary setpoints are deactivated for LOCAL master control.
276
"PROFIdrive"
"5: PROFIdrive"
Command sources – AOP30 <--> PROFIdrive
Converter cabinet units
Operating Instructions, 07/2016, A5E03347396A