ViewPoint 8650C
User Guide
----End
8.5 Setting the H.460 Parameters
When H.460 terminals is supported, you need to configure the relevant parameters.
Context
H.460 is a series of extensions to the H.323 videoconferencing standard from the ITU.
Introduced in 2005, several of the extensions, including H.460.17, H.460.18 and H.460.19,
deal with firewall and NAT traversal.
Procedure
Step 1 Login to the web interface.
Step 2 Choose Settings > H.323 and SIPto display the H.323 and SIP page.
Step 3 Click the H.460 to display the H.460 page shown as
Figure 8-15 H.460
Step 4 Set the H.460 parameters.
Step 5 Click OK.
----End
8.6 Managing IVR Audios
The MCU provides default IVR audio instructions. The system can play the corresponding
audio instruction for different operation status. The system also supports the customization of
audio instructions to suit the actual scenarios.
Issue 10 (2013-07-20)
When adding a site that is on a public network, you can set either the IP address or the registration
number.
When adding a site where a terminal that is in a different private network from the MCU, you must
set the registration number.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
8 Service Configuration
Figure
8-15.
101