Advertisement
ViewPoint 8650C
User Guide
Figure 1-2 Front panel
1 FE (maintenance port)
5 Optical port: SFP1 (upper),
SFP0 (lower)
Table 1-2
know the running status of the system in real time.
Table 1-2 Indicators on the front panel
Indicator
ALM
RUN
GE/FE
network
port
indicators
Issue 10 (2013-07-20)
ViewPoint 8650C
FE is short for fast Ethernet. The transmission rate at an FE interface is 100 Mbit/s.
GE is short for gigabit Ethernet. The transmission rate at a GE port is 1000 Mbit/s.
describes the indicators on the front panel. By viewing these indicators, you can
Color
Status
Red
Off
On
Green
On
Off
Slow blinking (about 0.5
Hz)
Fast blinking (about 4 Hz)
Green
On
(the
connectio
Off
n status
indicator)
Orange
Blinking
(the data
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
1 2 3 4 5
2 RS-232 serial port (the baud
rate is 115200 bit/s)
6 ALM indicator
Description
The board works normally.
There are faults in the MCU.
There is power input but some error
occurs on the board.
There is no power input or some
error occurs on the board.
The board is running normally
according to the configuration.
The board is loading programs.
Connection at the network port is
normal.
There is no connection at the
network port or the connection is
abnormal.
NOTE
Data is being transmitted through
the network port.
1 Overview
7
6
3 GE1
7 RUN
indicator
When the GE or FE network interface
is properly connected to the network at
a 10 Mbit/s rate, the green indicator is
off.
4
GE0
4
Advertisement
