Advertisement
ViewPoint 8650C
User Guide
7.4.2 Controlling a Conference
Table 7-1
Table 7-1 Participant control
Icon
Issue 10 (2013-07-20)
describes the participant control icons available in the lower part of the right pane.
Function
Remove a
participant.
Call a
participant.
Disconnect a
participant.
Broadcast
participant.
Stop
broadcasting
participant.
View
participant.
Adjust volume.
Unmute
microphone.
Mute
microphone.
Unmute
speaker.
Mute speaker.
Audio
loopback.
Video loopback.
Cancel
loopback.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
7 Holding a Conference on the SMC2.0
Description
Delete a selected participant from a conference.
Call a selected participant to join a conference.
Disconnect a selected participant.
Broadcast the video of the participant given the floor to
the other conference participants.
Stop broadcasting the participant that is being broadcast
in a conference.
Specify the participant to be viewed by a selected
participant. In discussion mode, a conference participant
can view any of the other participants.
Adjust the volume of a selected participant heard by the
other participants in a conference.
Unmute the microphone of a selected participant so the
other participants in the conference can hear the selected
participant.
Mute the microphone of a selected participant so the
other participants in the conference cannot hear the
selected participant.
Unmute the speaker of a selected participant so the
participant can hear conference audio.
Mute the speaker of a selected participant so the
participant cannot hear conference audio.
Perform an audio loopback test on a selected participant.
Perform a video loopback test on a selected participant.
Stop all the loopback tests performed on a selected
participant.
86
Advertisement
