Advertisement
ViewPoint 8650C
User Guide
Parameter
Quality
Step 5 Click OK.
Figure 6-4
successfully.
Figure 6-4 Add Participant Succeed
Step 6 Repeat
----End
6.3 Scheduling a Conference
Prerequisites
Before scheduling a conference, ensure that:
Procedure
Step 1 Log in to the 8650C web interface.
Step 2 Choose Conferences > New Conference.
The Add > Set Parameters dialog box is displayed, as shown in
Issue 10 (2013-07-20)
Description
to be added.
It specifies the audio-visual
parameters and transmission
rate of the conference. The
higher the level, the better the
audio-visual experience.
NOTE
Make sure that the endpoints
support the audio-visual
protocol, format and participant
rate when Quality is set to
Custom those parameters are
available to be set.
indicates the participant has been added and registers with the embedded GK
Step 3
through
Step 5
All participant endpoints have registered with the 8650C embedded GK.
The conference involves two participant endpoints or more.
Set the connection mode to Built-in web.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
6 Holding a Conference on the Web Interface
to add another participant endpoint.
Setting
Default value: High
Figure
6-5.
67
Advertisement
