Advertisement
ViewPoint 8650C
User Guide
For smoother operation during the use of the web interface, a computer with the following
specifications is recommended:
3.2 Using the Web Interface
The MCU provides the Web interface, and thus no additional management software is
required for control on the MCU.
3.2.1 Logging In to the Web Interface
Procedure
Step 1 Connect the client computer to the GE0 port of 8650C with a crossover cable, or connect the
client computer and to 8650C to the same switch in the LAN.
Step 2 In the address bar of the browser, enter the IP address of the GE0 network interface of 8650C
(The default IP address is 192.168.2.1), Press Enter. The login page of the Web interface is
displayed, as shown in
Figure 3-1 Login page of the Web interface
Step 3 Select a language from the Language drop-down list box. Fill in User Name and Password .
Then click Log In.
Issue 10 (2013-07-20)
CPU: Intel Pentium E2200 2.2 GHz or higher
Memory: 1 GB or more
Operating system: Windows XP or later
Browser: Microsoft Internet Explorer 7.0, Mozilla Firefox 3.5, or later
Figure
If you are unable to access the MCU web interface using HTTP, use HTTPS instead.
If a warning is displayed indicating that there is a problem with the website's security certificate,
click Continue to this website to continue.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3-1.
3 Accessing the MCU
26
Advertisement
