Advertisement
ViewPoint 8650C
User Guide
Icon
Issue 10 (2013-07-20)
Function
Description
Cancel Loop
This is used to stop all the loopback tests that are being
performed on a selected participant.
This is used to set the call mode of a participant to
Endpoint dial-in
Endpoint dial-in. In this case, the participant needs to call
the MCU to join the conference.
Single dial-out
This is used to set the call mode of a participant to Single
dial-out. In this case, the MCU needs to call the
participant to add the participant to the conference.
Start Multicast
This is used to enable the multicast function. The multicast
parameters are set in the corresponding conference profile.
End Multicast
This is used to disable the multicast function.
Extend
This is used to extend the duration of the selected
Conference
conference.
End Conference
This is used to end the selected conference.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
6 Holding a Conference on the Web Interface
73
Advertisement
