Advertisement
ViewPoint 8650C
User Guide
Table 6-2 Component data plan
Component
8650C
GK
HUAWEI ViewPoint
9000 HD
videoconferencing
endpoint 1
HUAWEI ViewPoint
9000 HD
videoconferencing
endpoint 2
Setting GK
The GK functions as a bridge to transfer call information between videoconferencing
endpoints and the MCU, translates the addresses of the videoconferencing endpoints and the
MCU, and controls calls and bandwidth. The 8650C supports Built-In GK, you can set the
Built-In GK enabled and registers 8650C with it.
Step 1 Enable Built-In GK.
1.
2.
3.
4.
Step 2 Register with GK.
1.
2.
3.
Table 6-3 Gatekeeper parameters
Parameter
Register with
Gatekeeper
Issue 10 (2013-07-20)
IP Address
200.54.0.144
200.54.0.144
NOTE
200.54.10.137
200.54.10.138
Log in to the MCU web interface.
Choose Gatekeeper > Settings.
Select Enable Built-In Gatekeeper and set GK ID to GK1.
Remain other parameters the default values.
Click OK.
Log in to the MCU web interface.
Choose Settings > H.323 and SIP > Gatekeeper.
Set GK parameters listed in
Description
Whether the MCU registers with a GK.
Selected: The MCU registers with a GK. After the
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
6 Holding a Conference on the Web Interface
Use the embedded GK of
the 8650C.
Table 6-3
and other parameters to the default values.
Other Configuration
None
None
Site name: site1
GK address: 200.54.0.144
Site number: 0100001
GK authentication name:
terminal1
Site name: site2
GK address: 200.54.0.144
Site number: 0100002
GK authentication name:
terminal2
Setting
Select this
option.
62
Advertisement
