Advertisement
ViewPoint 8650C
User Guide
Figure 7-7 MCU configuration information
Step 5 Under general settings, Set Name and Prefix. Under H.323 settings, specify H323 ID and
GK address.
Step 6 Click Add.
----End
Result
If the MCU successfully interconnects with the SMC2.0, the following icons are displayed on
the MCU page:
Follow-up Procedure
If an MCU fails to be added to the SMC2.0, verify that the GK prefix has been registered with
the SMC2.0.
Issue 10 (2013-07-20)
The default SNMP settings on the MCU are displayed on the page. If you have modified the default
SNMP settings on the MCU, a search for the MCU will fail. If the search fails, modify the displayed
SNMP settings based on your modifications on the MCU. For details, see the HUAWEI SMC2.0
V100R002 Configuration Guide. You can contact Huawei technical support engineers or visit
http://enterprise.huawei.com/support
: The MCU is registered with a GK.
: The SMC2.0 is connected to the device.
: The MCU is online.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
7 Holding a Conference on the SMC2.0
to obtain this document.
80
Advertisement
