ABB ACS560 Quick Installation And Start-Up Manual page 17

6. For R3, connect cable by the motor cable method mentioned instep 3.
7. Ground the shield 360 degrees (7a).
8. Connect the twisted shield to the grounding terminal (7b).
9. For R3, connect the conductors to the R+ and R- terminals (7c).
9. Connect the conductors to the R+ and R- terminals (7c).
10. Tighten to the torque given below.
10. Tighten to the torque given below.
Frame size
Frame size
R+. R-
R+, R-
Finalization
11. Install the grounding shelf for the control cables (included with the mounting
Finalization
Finalization
screws in a plastic bag in the delivery) onto the grounding shelf for the power
11. Install the grounding shelf for the control cables (included with the mounting
cables.
11. Install the grounding shelf for the control cables (included with the mounting screws
screws in a plastic bag in the delivery) onto the grounding shelf for the power
in a plastic bag in the delivery) onto the grounding shelf for the power cables.
cables.
12. Ground the motor cable shield at the motor end. For minimum radio frequency
12. Ground the motor cable shield at the motor end. For minimum radio frequency
interference, ground the motor cable shield 360 degrees at the lead-through of
interference, ground the motor cable shield 360° at the lead-through of the motor terminal
the motor terminal box.
box.
12. Ground the motor cable shield at the motor end. For minimum radio frequency
interference, ground the motor cable shield 360 degrees at the lead-through of
the motor terminal box.
8
8
R3
N·m lbf·ft
2.5...4.5 1.8...3.3
7c
7b
7a
8
8
EN - Quick installation and start-up guide 17
R3
N.m
2.5...4.5
Electrical installation 85
Electrical installation 85
lbf.ft
1.8...3.3
EN
HI