Sub Menus; Motor Data; Motor Control - ABB ACS560 Quick Installation And Start-Up Manual

Sub menus

The sub-menu items allows you to change settings and set actions. Some sub menus
also have menus and/or option lists. Each sub-menu item has access to frequently used
parameters. For the complete parameter list, go to Parameter settings
Note: The content of the sub menus depend on the drive type.

Motor data

Values in this menu are based on the motor rating plate. See parameter group 98 User
motor parameters.
Note: Values cannot be changed while drive is running.
1) Motor control mode
3) Motor nominal current
5) Motor nominal frequency
7) Motor nominal torque
9) Motor nominal Cos Φ

Motor control

See parameter group 97 Motor control.
1) Start mode – Automatic,
constant time, Fast
3) Acceleration time -
Time for speed to change
from zero to the speed
defined by parameter.
5) Maximum frequency/
Speed - Maximum allowed
frequency/speed.
7) Minimum frequency/
Speed - Minimum allowed
frequency/speed.
→
Selected start mode is Automatic.
EN - Quick installation and start-up guide 35
2) Motor nominal power
4) Motor nominal voltage
6) Motor nominal speed
8) Motor phase order - U V
W, U W V
2) Stop mode – Coast,
Ramp
4) Deceleration time -
Time for speed to change
from the speed defined by
parameter to zero.
6) Maximum current -
Maximum allowed current.
.
EN
HI