Dc Connection; Connecting The Control Cables - ABB ACS560 Quick Installation And Start-Up Manual

22 EN - Quick installation and start-up guide
Finalization
10. Ground the motor cable shield at the motor end. For minimum radio frequency
15. Ground the motor cable shield at the motor end. For minimum radio frequency
interference, ground the motor cable shield 360 degrees at the lead-through of
interference, ground the motor cable shield 360° at the lead-through of the motor terminal
the motor terminal box.
box.
7

DC connection

EN
The UDC+ and UDC- terminals (as standard in frames R4...R8) are for using external
brake chopper units.
HI

Connecting the control cables

Connect the cables as described in firmware manual. See the below default I/O
connections of ABB standard macro. See other macro connections in the firmware
manual.
Electrical installation 81