Connection Macro; Selected Macro Is Abb Standard (2-Wire) - ABB ACS560 Quick Installation And Start-Up Manual

Connection macro

Values are based on drive type. See parameter 96.04 Macro select.
1) Macro - Displays the se-
lected macro name. For ex-
ample, ABB standard (2-
wire).
→

Selected macro is ABB standard (2-wire)

1) ABB standard (2-wire)
- Default macro for general
purpose.
3) ABB standard (vector)
- Similar to standard macro
but uses vector control.
5) PID - Suitable for closed-
loop control systems such
as pressure control, flow
control, etc.
7) Panel PID - Suitable for
applications where drive is
always controlled by PID
and the reference comes
from an analog input AI1.
9) Pharma - Suitable for
pharmaceutical applica-
tions.
11) Torque control - Simil-
ar to standard macro but
uses torque control.
→
Displays the status of all I/O connections.
EN - Quick installation and start-up guide 37
1
3
PID
5
PID
7
9
T
CNTRL
11
2) I/O Connections - Dis-
plays the selected macro-
specific I/O connections.
See menu description be-
low.
2) 3-wire macro - Suitable
when the drive is controlled
2 using momentary push but-
tons.
4) Motor potentiometer -
4
Enables adjusting the motor
speed using the two-push
6
PFC
buttons.
6) PFC - Pump and fan
SPFC
8
control logic for controlling
multiple pumps or fans
10
through relay outputs of the
drive.
Jigar
12
8) SPFC - Variant of PFC
and can be used to gener-
ate a smaller pressure spike
when a new auxiliary motor
is put into operation.
10) Plastic extrusion -
Suitable for plastic extrusion
application.
12 Jigar - Suitable for Jigar
machine operations.
EN
HI