Compliance With The European Emc Directive; Compliance With The European Rohs Ii Directive 2011/65/Eu - ABB ACS560 Quick Installation And Start-Up Manual

126 Technical data
The compliance with the European Low Voltage Directive has been verified according
to standard EN 61800-5-1:2007. The declaration of conformity (3AXD10000549832) is
available on the Internet. See section Document library on the Internet on the inside of
the back cover.
￭

Compliance with the European EMC Directive

The EMC Directive defines the requirements for immunity and emissions of electrical
equipment used within the European Union. The EMC product standard (EN 61800-
3:2004 + A1:2012) covers requirements stated for drives.
The declaration (3AXD10000549782) is available on the Internet. See section Document
library on the Internet on the inside of the back cover.
￭

Compliance with the European ROHS II Directive 2011/65/EU

EN
The RoHS II Directive defines the restriction of the use of certain hazardous substances
in electrical and electronic equipment. The declaration (3AXD10000550609) is available
HI
on the Internet. See section Document library on the Internet on the inside of the back
cover.
￭ Compliance with the European Machinery Directive 2006/42/EC 2nd Edition
– June 2010
TO BE ADDED
The drive is a machinery component that can be integrated into a wide range of
machinery categories as specified in European Commission's Guide to application of
the Machinery Directive 2006/42/EC 2nd Edition – June 2010. The declaration
(3AXD10000549855) is available on the Internet. See section Document library on the
Internet on the inside of the back cover.
Validating the operation of the Safe torque off function
See chapter Technical data (page 117).