Automatic; Coast; Constant; Fast - ABB ACS560 Quick Installation And Start-Up Manual

36 EN - Quick installation and start-up guide
1) Automatic - Default start
mode. Guarantees optimal
motor start in most cases. It in-
cludes the flying start function
(starting into a rotating motor)
and the automatic restart func-
tion. The drive motor control
program identifies the flux as
well as the mechanical state of
the motor and starts the motor
instantly under all conditions.
→
Selected stop mode is Coast.
EN
1) Coast - default stop mode.
Stops by switching off the out-
HI
put semiconductors of the
drive.
2) Constant - Enables constant
pre-magnetizing time (the mo-
tor start is synchronized with
the release of a mechanical
brake).
3) Fast - The pre-magnetizing
time is determined automatic-
ally, being typically 200 ms to
2 s depending on motor size.
This mode does not have a
shortcut icon.
2) Ramp - Stops along the act-
ive deceleration ramp.