Diagnostics; Energy Efficiency; Backup Data; Parameter Settings - ABB ACS560 Quick Installation And Start-Up Manual

Diagnostics

Displays the active faults and warnings and how to fix and reset. For information about
fault and warning codes, see section
1) Active Fault - Displays
active faults.
3) Active Warnings - Dis-
plays active warnings.

Energy Efficiency

Optimizes the motor flux so that total energy consumption and motor noise level are
reduced when drive operates below the nominal load.
1) Saved energy in kWh -
Energy saved in kWh com-
pared to direct-on-line motor
connection.
3) Saved energy in MWh -
Energy saved in MWh com-
pared to direct-on-line motor
connection.
5) Cost per kWh - Energy
cost (in INR) per kWh.

Backup data

Restore and Backup data between drive and panel.
1) Backup from the drive to
the control panel.

Parameter settings

Contains the complete parameter list and modified parameter list.See
listing (page 47).
EN - Quick installation and start-up guide 39
Diagnostics (page 127).
2) Fault History - Lists the
fault history.
4) I/O status - I/O settings.
2) Saved money - Monet-
ary savings compared to
direct-on-line motor connec-
tion.
4) Saved money x 1000 -
Monetary savings in thou-
sands compared to direct-
on-line motor connection.
2) Restore the back up from
the panel to the drive.
A progress view appears
during the backup.
Parameter
EN
HI