12 EN - Quick installation and start-up guide
PE
PE
EN
80 Electrical installation
HI
5. Connect the input power cable as follows:
5. Connect the input power cable as follows:
•
Connect the twisted shield of the cable to the grounding terminal (5a).
•
Connect the twisted shield of the cable to the grounding terminal (5a).
•
Connect the phase conductors of the cable to the L1, L2 and L3 terminals.
•
Connect the phase conductors of the cable to the L1, L2 and L3 terminals.
5a
•
Tighten the screws to the torque given below:
•
Tighten the screws to the torque given below:
Frame size
L1. L2. L3
Frame size
6. Connect the braking resistor cable as the motor cable in step 4.
7. Ground the shield 360 degrees (6a).
L1, L2, L3
8. Connect the twisted shield to the grounding terminal (6b) and the conductors to
the R+ and R- terminals (6c).
6. Connect the braking resistor cable as the motor cable. See step 3.
7. Ground the shield 360° (6a).
6a
5b
R0...R1
N·m
lbf·ft
0.5...0.6
6c
6b
R2
N·m
lbf·ft
0.4
1.2...1.5 0.9...1.1
R0...R1
N·m
lbf·ft
0.5...0.6
0.4
R2
N·m
lbf·ft
1.2...1.5
0.9...1.1