Siemens SIMATIC Manual page 131

3.20 Digital output module SM 322; DO 64 x DC 24 V/0.3 A Sinking (6ES7322-1BP50-0AA0)
Technical specifications
Voltages, currents, electrical potentials
Rated load voltage L+
Total current of outputs (per group)
For horizontal installation
•
Up to 25 °C
•
to 40 °C
•
to 60 °C
For vertical installation
•
to 40 °C
•
Up to 25 °C
Electrical isolation
•
Between channels and the backplane bus
•
Between channels
In groups of
Isolation test voltage
Current consumption
•
From the backplane bus
•
From load voltage L+ (no load)
Power loss of the module
Status, interrupts, diagnostics
Status display
Interrupts
Diagnostic functions
Actuator selection data
Output type
Output voltage
•
"1" signal
Output current
"1" signal
•
Rated value
•
Permitted range
"0" signal (residual current)
Output delay (resistive load)
•
"0" to "1" transition
•
"1" to "0" transition
Load resistance range
Lamp load
Wiring two outputs in parallel
•
for redundant load control
•
for performance increase
S7-300 Module data
Manual, 06/2017, A5E00105505-AJ
24 V DC
max. 2.0 A
max. 1.6 A
max. 1.2 A
max. 1.6 A
max. 2.0 A
Yes
Yes
16
500 VDC
max. 100 mA
max. 75 mA
Typ. 6.0 W
Green LED per channel
None
None
Sinking
24 V DC
M+ (0.5 V) at full load
Typ. 0.3 A
2.4 mA to 0.36 A
<100 µA
<450 µs
<450 µs
80 Ω to 10 kΩ
Max. 5 W
supported (with external diode)
not supported
Digital modules
131