Parameters Of Sm 327; Di 8/Do 8 X 24 Vdc/0.5 A - Siemens SIMATIC Manual

3.39 Programmable digital IO module SM 327; DI 8/DO 8 x DC 24 V/0.5 A (6ES7327-1BH00-0AB0)
3.39.1

Parameters of SM 327; DI 8/DO 8 x 24 VDC/0.5 A

Programming
The general procedure of programming digital modules is described in the chapter
Programming digital modules (Page 58).
Parameters of SM 327; DI 8/DO 8 x DC 24 V/0.5 A, programmable
The table below lists the programmable parameters of SM 327; DI 8/DO 8 x DC 24 V/0.5 A,
including defaults.
The defaults apply if you have not set any parameters in
The comparison illustrates the parameters you can edit:
● in
● using SFC55 "WR_PARM"
● using SFB53 "WRREC" (for GSD, for example).
Parameters set in
SFB 53 (refer to the
Table 3- 38 Parameters of SM 327; DI 8/DO 8 x DC 24 V/0.5 A
Parameters Range of val-
ues
Digital output yes/no
S7-300 Module data
Manual, 06/2017, A5E00105505-AJ
STEP 7
STEP 7
may also be transferred to the module using SFCs 56 and 57, and
STEP 7
Default
no
) Online Help).
Parameter Scope
type
dynamic Channel
Digital modules
STEP 7 .
Data record Programmable using ...
number
SFC55,
SFB53
1 yes
PG
yes
235