Siemens SIMATIC Manual page 160

Digital modules
3.25 Digital output module SM 322; DO 16 x DC 24 V/0.5 A High Speed; (6ES7322-1BH10-0AA0)
Technical specifications
Actuator selection data
Output voltage
•
"1" signal
Output current
•
"1" signal
Rated value
Permitted range
•
"0" signal (residual current)
Output delay (resistive load)
•
"0" to "1" transition
•
"1" to "0" transition
Internal module cycle time between the backplane bus and the out-
put driver input
•
"0" to "1" transition
•
"1" to "0" transition
Load resistance range
Lamp load
Wiring two outputs in parallel
•
For redundant load control
•
For performance increase
Control of a digital input
Switching frequency
•
with resistive load
•
with inductive load to IEC 947-5-1, DC 13
•
with lamp load
Internal limiting of the inductive shutdown voltage to
Short-circuit protection of the output
•
Threshold
Wiring of the actuators
160
min. L + (- 0.8 V)
0.5 A
5 mA to 0.6 A
Max. 0.5 mA
max. 100 μs
max. 200 μs
0.1 µs to 20 µs
0.1 µs to 20 µs
48 Ω to 4 kΩ
max. 5 W
Supported (only outputs of the same group)
Not supported
Supported
max. 1000 Hz
max. 0.5 Hz
max. 10 Hz
typ. L + (-53 V)
yes, electronic
typ. 1 A
using a 20-pin front connector
Manual, 06/2017, A5E00105505-AJ
S7-300 Module data