Technical specifications
Technical specifications
Dimensions and weight
Dimensions W x H x D (mm)
Weight
Module-specific data
Supports parameter reassignment in RUN
Reaction of non-programmed outputs
Supports isochronous mode
Number of outputs
Cable length
•
shielded
Voltages, currents, electrical potentials
Rated load voltage L+
•
Reverse polarity protection
Electrical isolation
•
between channels and the backplane bus
•
between channels and electronics power supply
•
between channels
•
between channels and load voltage L+
Maximum potential difference
•
between S- and M
ANA
Isolation test voltage
Current consumption
•
from the backplane bus
•
from load voltage L+ (no-load)
Power loss of the module
Generation of analog values
Resolution (including overshoot range)
•
± 10 V; ± 20 mA;
•
4 mA to 20 mA; 1 V to 5 V
•
0 V to 10 V; 0 mA to 20 mA
Conversion time (per channel)
Transient recovery time
•
with resistive load
•
with capacitive load
•
with inductive load
S7-300 Module data
Manual, 06/2017, A5E00105505-AJ
6.15 Analog output module SM 332; AO 2 x 12 Bit; (6ES7332-5HB01-0AB0)
(CMV)
40 x 125 x 117
Approximately 220 g
Yes
Return the output value which was valid before the
parameterization
no
2
max. 200 m
24 V DC
Yes
Yes
Yes
no
Yes
3 V DC
500 V DC
max. 60 mA
max. 135 mA
typ. 3 W
11 bits + sign
12 bits
max. 0.8 ms
0.2 ms
3.3 ms
0.5 ms (1 mH)
3.3 ms (10 mH)
Analog modules
471