Analog modules
6.7 Analog input module SM 331; AI 8 x 12 bit;(6ES7331-7KF02-0AB0)
Technical specifications
Temperature compensation
•
Internal temperature compensation
•
External temperature compensation with compensating
box
•
Compensation for 0 °C reference junction temperature
•
Technical unit of temperature measurement
See also
Diagnostics messages of analog input modules (Page 296)
6.7.2
Measurement types and ranges
Introduction
Module SM 331; AI 8 x 12 Bit has measuring range modules
The measurement type and range is configured at the "measuring range" parameter in
STEP 7
The default setting of the module is "voltage" measurement with "± 10V" range. You can use
these default settings without having to program the SM 331; AI 8 x 12 Bit in
Measuring range modules
You may have to change the position of the measuring range modules to suit the
measurement type and range (see the chapter
analog input channels
Mark the position of the measuring range module on the front door (see figure).
362
.
). The necessary settings are also available on the module's imprint.
programmable
supported
supported
supported
degrees Centigrade
Setting the measuring types and ranges of
STEP 7
.
S7-300 Module data
Manual, 06/2017, A5E00105505-AJ