2 Robot arm
■ Fixing the flexible cable
(1) Connect the connector to the robot arm.
The connection method to a robot arm is the same as a standard machine cable. Please refer to the sep -
arate "Instruction Manual/ROBOT ARM SETUP & MAINTENANCE" and connect.
(2) Wind the silicon rubber around the cable at a position 300 to 400 mm from the side of robot arm and exten -
sion section as shown below, and fix with the nylon clamp to protect the cable from external stress.
The bend size of cables are as follows.
Fig.2-23 : Fixing the flexible cable
Options
2-45