Mitsubishi Electric MELFA CR800 Series Special Specifications Manual page 88

3 Controller
Parameter
name
Name
M1PTEXC
:
M3PTEXC
USER -
Note3)
AREA
Note1) The level indicates the signal level.
L: Level signal → The designated function is validated when the signal is ON, and is invalidated when the
E: Edge signal → The designated function is validated when the signal changes from the OFF to ON state,
Note2) Four elements are set in the order of input signal start No., end No., output signal start No. and end No.
Note3) Up to eight points can be set successively in order of start output signal No. and end output signal No.
Dedicated input/output
3-75
Input
Function
None
None
signal is OFF.
and the function maintains the original state even when the signal then turns OFF.
Note1)
Level Name
Maintenance parts
replacement time
L
warning signal
User-designated area
8-points
Output
Function
Outputs that the maintenance parts
have reached the replacement time.
Outputs that the robot is in the user-
designated area.