Siemens SINAMICS S120 Manual page 244

Line Modules
5.5 Active Line Modules Chassis-2
Attaching the PE connections
The shielding connections are used to connect the cable shields of the shielded signal cables
on the Active Line Module.
Attach the support plate for the shield connections at the intended position. You can break
off individual parts from the 6-part support plate corresponding to your specific
requirements, torque 3 Nm.
Figure 5-52
242
Attaching the PE connections
Air-cooled chassis power units
Equipment Manual, 06/2020, 6SL3097-5AE00-0BP3