Additional Information - Siemens SINAMICS S120 Manual

Air-cooled chassis power units
Hide thumbs Also See for SINAMICS S120:
Table of Contents

Advertisement

Introduction

1.6 Additional information

EMC limit values for South Korea
The mandatory EMC limits for Korea correspond to the limits of EN 61800-3 (EMC product
standard for adjustable speed electrical drive systems) for category C2 or to limit class A,
Group 1 according to EN 55011.
Compliance with the limits according to category C2 or class A, group 1 is achieved with
suitable additional measures. Further, additional measures may be required, such as using an
additional radio interference suppression filter (EMC filter).
The measures for EMC-compliant design of the system are described in detail in this manual
and in the "SINAMICS Low Voltage Engineering Manual".
The final statement regarding compliance with the standard is always specified by the
respective label attached to the individual unit.
1.6
Additional information
Ensuring reliable operation
The manual describes a desired state which, if maintained, ensures the required level of
operational reliability and compliance with EMC limit values.
Should there be any deviation from the requirements in the equipment manual, appropriate
actions (e.g. measurements) must be taken to check/prove that the required level of
operational reliability and compliance with EMC limit values are ensured.
Spare parts
Spare parts are available on the Internet at the following address
(https://support.industry.siemens.com/sc/de/en/sc/2110).
Product maintenance
The components are subject to continuous further development within the scope of product
maintenance (improvements to robustness, discontinuations of components, etc).
These further developments are "spare parts-compatible" and do not change the article
number.
In the scope of such spare parts-compatible further developments, connector/connection
positions are sometimes changed slightly. This does not cause any problems with proper use
of the components. Please take this fact into consideration in special installation situations
(e.g. allow sufficient clearance for the cable length).
18
Air-cooled chassis power units
Equipment Manual, 06/2020, 6SL3097-5AE00-0BP3

Advertisement

Table of Contents
loading

Table of Contents